Gardena ProCut 800 Operating Instructions Manual

Also see for ProCut 1000: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Gardena ProCut 800 Operating Instructions Manual Manual pdf 7 page image

16GBReplacing the filamentcassette :RISK OF INJURY !A V Never use metallic cutting elements orreplacement parts and accessories notprovided by GARDENA.Only use original GARDENA Filament Cassettes. You canorder Replacement Filament Cassettes from your GARDENAdealer or directly from the GARDENA Customer Service.• Filament Cassette forTurbotrimmer ProCut 800 / 1000 : Art. No. 53081. Unplug the mains plug.2. Grip the filament cassette holder M and unscrew the cassettecover N.3. Remove the filament cassette O from the cassette holder Mand untwist the spring.4. Remove any dirt.5. Pull about 10 cm of the filament 1 from the new cassette Oout through the slot P in the cassette.6. Turn the spring Q into the new filament cassette O and threadthe cutting filaments 1 into the filament cassette holder M.7. Insert the cassette O into thecassette holder M and turn itso that the markings R onthe cassette are visible in theholes in the cassette holder M.When doing this the cuttingfilaments must not get trapped.8. Insert the cassette holder andthe cassette until the end ofthe spindle S sticks out about5 mm.9. Screw the cassette cover N onto the end of the spindle S.v If the markings R cannot be turned until they are under theholes, turn the cassette O to and fro until it fits into thecassette holder M properly.7. TroubleshootingRisk of injury from the cutting filament !V Always unplug the mains plug of the Turbotrimmerbefore troubleshooting.If the cutting filament has disappeared into the filament cassetteor the tap mechanism still doesn’t work after pulling the cuttingfilament 1 it may be fused together in the filament cassette O.1. Unplug the cable from the mains.2. Remove the filament cassette O as described in6. Maintenance“Replacing the filament cassette”.PR1 MQRONP1RM R1 1ORISK OF INJURY !Releasing a cutting filamentthat has gone into thecassette or which has fused :NMOS