Gardena ProCut 800 Operating Instructions Manual

Also see for ProCut 1000: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Gardena ProCut 800 Operating Instructions Manual Manual pdf 8 page image

17GB3. Unwind the cutting filament 1, clean the filament cassette Oand the cutting filament 1 and wind the cutting filament 1onto the cassette O once more.4. Insert the filament cassette again as described under6. Maintenance“Replacing the filament cassette”.Note :The cassette cover N can also be pressed by hand to lengthenthe filament manually.Fault Possible cause RemedyThe Turbotrimmer Filament cassette empty. v Replace the filament cassetteno longer cuts (see 6. Maintenance“Replacing the filamentcassette” ).Blade cover not removed. v Remove blade cover.Tap mechanism doesn’t work v Remove filament that hasbecause the filament has disappeared into thedisappeared into the cassette cassette or fused (seeor fused. above).AIn the event of other faults please contact GARDENA Service.Repairs should only be carried out by GARDENA service centres or dealersauthorised by GARDENA.8. Technical DataTurbotrimmer ProCut 800 (Art. 8851) ProCut 1000 (Art. 8852)Motor power consumption 800 W 1000 WMains voltage /mains frequency 230 V / 50 Hz 230 V / 50 HzFilament thickness 2 mm 2 mmCutting width 350 mm 350 mmFilament supply 2 x 3 m 2 x 3 mFilament feed Tap mechanism Tap mechanismWeight 5.0 kg 5.7 kgRpm of filament cassette 9500 rpm 8500 rpmWork area related emissioncharacteristic value L pA 1) 83 dB (A) 80 dB (A)Uncertainty KpA 2.5 dB (A) 2.5 dB (A)Noise level L WA 2) measured 92 dB (A) / measured 92 dB (A) /guaranteed 96 dB (A) guaranteed 96 dB (A)Hand / arm vibration a vhw 1) 5.58 m / s 2 1.69 m / s 2Uncertainty Kvhw 1,5 m / s 2 1,5 m / s 2Measuring method according to 1) EN 786 2) directive 2000 /14 / EC1 1O