Garland S680 SERIES Installation And Service Manual

Also see for S680 SERIES: Installation and operation manual Installation, operating and service instructions Installation and operation manual

Contents

Garland S680 SERIES Installation And Service Manual Manual pdf 4 page image

Part # P152 Rev 1 (01/13/10)Page 4DIMENSIONS AND SPECIFICATIONS, MODELS S,SU & SS6847-1/2"[190mm] REAR CABLEENTRANCE 3-1/2"[829mm]24-1/2"[622mm]34-1/4"[870mm]41"[1041mm]9-1/4"[235mm]31-3/4"[806mm]6"[152mm]60"[1524mm]REAR CABLEENTRANCE15-1/4"[387mm] 29"[737mm]3"[76mm]4-3/4"[121 mm]W/OPTIONALRC MOTOR6"[152mm]OPTIONALHIGH SHELF13-5/8"[346mm]57-5/8"[1465mm]Model Total KwLoadNominal Amps208V/1Ph 208V/3 Ph 240V/1Ph 240V/3 Ph 400 V/3N 415V/3NS684* 27 127 76 110 66 — —SS/SU684** 33 157 97 136 84 60 58SS/SU684RC2*** 34 N/A 100 142 87 60 58SalamanderBroiler****7 N/A***** 23 29 20 4 4*(All purpose tubular elements) **(Sealed -top elements, Model # SS684 in North America) *** Maximum on any 684 series range****Add when wired to range base (SER/SUER-680) *****Note: For 208V/1phase the salamander cannot be wired into the rangeExterior Dimensions Oven Interior DimensionsHeight Width Depth† Height Width Depth47" (1194mm) 60" (1524mm) 34-1/4" (870mm) 13-1/2" (343mm) 26-1/4” (667mm) 22" (559mm)† With Front Rail Note: Shipping Cubic Feet is 84 5Ratings:Tubular Elements - Small 6-1/2" (165mm) - 1250 Watts Large 8-1/2" (216mm) - 2100 WattsSealed Elements - Small 7” (180mm) - 2000 Watts Large 8-5/8” (220mm) - 2600 WattsHot Plate - (per 12"/305mm section) - Front and Rear sections each 1675 Watts, (3350 Watts total)Griddle - (per 12"/305mm section) - 3350 WattsStandard Oven - 4 85 kWConvection Oven - 5 0 kW (plus 0 5kW fan motor, for 5 5kW total)NOTE: Many local codes exist, and it is the responsibility of the Ownerand the Installer to comply with those codesInstallationClearances: Side BackRange w/oSalamander 3” (76mm) 2” (51mm)Range w/Salamander 7” (178mm) 2” (51mm)Hot Plate 10”(254mm) —NOTE: For ranges with convection oven(s), (models withsuffix `RC’ or `RC2’), air circulation is required for properoperation of fan motors These models must not be daismounted or installed without legs