Garland XE24 Installation, Operating & Service Instructions

Also see for XE24: Installation, operation and maintenance manual Installation and operation manual

Part # 4517125 (09/03)Page 18PROGRAMMING continuedMenu Items...To Change the Cook Time of a Product:1. Press and hold for three, (3) seconds. “ENTERCODE” will be displayed.2. Using the Gap Setting buttons,enter the code, (1251). “ENTER CODE **** ” willbe displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS”will be displayed.4. Press . “MENU ITEMS STANDBY” will bedisplayed.5. Use and to choose the desired Menu Item.6. Press to display “(MENU ITEM) COOKTIME XX:XX”7. Use and to adjust the cook time.8. Press to save the changes.9. Press to return to “PROGRAMMING MODEMENU ITEMS”10. Press again to exit.To Turn Platen, (2-Sided), Cooking On/Off:1. Press and hold for three, (3) seconds. “ENTERCODE” will be displayed.2. Using the Gap Setting buttons,enter the code, (1251). “ENTER CODE **** ” willbe displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS”will be displayed.4. Press . “MENU ITEMS STANDBY” will bedisplayed.5. Use and to choose the desired Menu Item.6. Press twice to display “(MENU ITEM) UPPERPLATEN YES/NO “7. Use and to turn upper platen on or off.8. Press to save the changes.9. Press to return to “PROGRAMMING MODEMENU ITEMS”10. Press again to exit.To Change Upper Platen Set Temperature:1. Press and hold for three, (3) seconds. “ENTERCODE” will be displayed.2. Using the Gap Setting buttons,enter the code, (1251). “ENTER CODE **** ” willbe displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS”will be displayed.4. Press . “MENU ITEMS STANDBY” will bedisplayed.5. Use and to choose the desired Menu Item.6 Press three, (3) times to display “(MENUITEM) UPPER TEMP XXX” displayed in °F or°C.7. Use and to change the set temperature tothe desired value.8. Press to save the changes.9. Press to return to “PROGRAMMING MODEMENU ITEMS”10. Press again to exit.To Change Grill Set Temperature:1. Press and hold for three, (3) seconds. “ENTERCODE” will be displayed.2. Using the Gap Setting buttons,enter the code, (1251). “ENTER CODE **** ” willbe displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS”will be displayed.4. Press . “MENU ITEMS STANDBY” will bedisplayed.