Garland XPE12 Service Manual

Also see for XPE12: Installation, operation and maintenance

Contents

Garland XPE12 Service Manual Manual pdf 37 page image

Document: GAR_SM_4601777 (4/16) 37Section 3 OperationON SCREEN WARNINGS AND ALERTS MESSAGESToo Cool/Too Hot - If the grill temperature is too cool toproperly cook a recipe, a “Too Cool to Cook” messageappears. The grill will not allow the cook cycle to startuntil it has heated to the minimum required startingtemperature.Similarly, if the grill is too hot, a “Too Hot to Cook” messageappears and a cook cycle can not start until the grill cools.In either case, another recipe can be selected. If the grill isat the right temperature to cook the newly selected recipe,the message disappears and cooking can start immediately.OPERATIONS OVERVIEWThe grill operates in several modes:• Press & Go mode to preheat and to cook.• Sleep mode to conserve energy.• Clean mode to attain temperature for cleaning andreset cleaning reminders.All operating modes are accessible using the easyToUCH™screen. All modes except for Sleep can be selected from theHome screen. Clean mode can be selected from the Homescreen or from the Press & Go screen.Press & Go ModePress & Go mode is used to initiate preheat andcook on the grill.PreheatThe grill will preheat after a menu has been selectedin Press & Go mode. If multiple menus have been setup, select the appropriate menu first to ensure the grillpreheats to the correct temperature, otherwise the menuis automatically selected after first ten (10) seconds for thelast menu.Menus and RecipesMultiple menus can be set up, each using different setpoint and containing different or share recipes. Therecipes stored by the grill contain the cooking profiles(times, temperatures, prompts and platen gap) for variousproducts. Menus and recipes can be added, edited anddeleted from the library. Cook time and/or platen gap maybe changed for each recipe as well, depending on the grillset up.Sleep ModeSleep mode lowers the platen to conserveenergy during periods of inactivity, keeping itready to start a cook cycle. When in Sleepmode, the grill will maintain the currenttemperatures.Automatic Sleep ModeThe grill can be configured to enter Sleep modeautomatically after a period of inactivity. Refer toeasyToUCH™ Diagnostics & Settings Menu.Manual Sleep ActivationUser can also manually activate the Sleep mode when inPress & Go.Clean ModeClean mode has two functions: brings the grillto the appropriate temperature for cleaningand it resets the cleaning counter.If a cleaning temperature has been set, Cleanmode will bring the grill to the set temperature prior tostarting the cycle. A cleaning temperature may be specifiedif required by the chemicals used for cleaning.Putting the grill into Clean mode before cleaning the grillupdates the “Last cleaned” date and resets the cleaningreminder prompts, if these are enabled.