Garmin APOLLO GX SERIES Service Manual

Contents

Garmin AT Rev --© 2004 Garmin AT GX Service Manual 2-5In an emergency, press DIRECT-TO and ENTER to fly direct to the highlighted airport. Press theSCAN key again to return the large knob to normal operation.Map Setup KeysThe Map Setup page displays three “smart” keys that provide a short cut for customizing your movingmap.The Route Line “smart” key toggles between On and Off.The Map Orientation “smart” key toggles between Desired Track (DTK), Track, and North.The Map Reference “smart” key toggles between Plane and Destination (Dest) as the moving mapcenter point.Communications Radio Mode Smart Keys - GX60/65The Recall (RCL), Monitor (MON), Memorize (MEM), and Flip/Flop (↔) keys are available in theGX60/65 after the COM soft key has been pressed.COM (GX60/65)Press the COM key to operate the communications radio functions.Flip/Flop (GX60/65)Press the Flip/Flop key to switch between the active (left-most) and standby (right-most) frequencywhile in the Comm function. You may use an optional external Flip/Flop key for the same operation asthe front panel control. Switching between frequencies is disabled while you are transmitting orediting in any function.RCL (Recall) (GX60/65)Press the RCL key to recall frequencies stored in the database.MON (Monitor) (GX60/65)Press the MON key to listen to the standby frequency. When the active frequency receives a signal,the GX60 will automatically switch to the active frequency.MEM (Memorize) (GX60/65)Press the MEM key to store the current standby frequency.XIT (Exit) (GX60/65)The XIT key will appear on the far left of the display, in the MSG key position, if the COM key hasbeen pressed to allow use of the radio during startup testing. Press the XIT key to return to the start-up sequence, or wait for test completion. The XIT key will disappear when testing is complete.