Garmin APOLLO GX SERIES Service Manual
                                                                                                                                                                      | |
Garmin AT Rev --7-30 GX Service Manual © 2004 Garmin ATHeadset Output Response1. Inject a 1000 μV RF signal with 85% AM modulation at 1 kHz into the Comm antenna port.2. Channel the Comm to the same frequency as the signal generator.3. Connect a 100 ohm resistor and AC power meter (or voltmeter) across the speaker output.4. Turn up the volume control on the Comm radio to make sure the output power can be greaterthan 280 milliwatts (5.92 Vrms across 100 ohms). Record this level.5. Change the modulation frequency to 350 Hz and record the output power at the headset.6. Change the modulation frequency to 2.5 kHz and record the output power at the headset.7. The audio power at 350 Hz or 2.5 kHz should not be down greater than 6 dB with respect tothe power at 1 kHz.Audio response: 350 Hz = ___ NMT 6 dB 1 kHz = ___ 0 dB 2.5 kHz = ___ NMT 6 dBHeadset Distortion1. Inject a 1000 μV RF signal with 85% AM modulation at 1 kHz into the Comm antenna port.2. Channel the Comm to the same frequency as the signal generator.3. Connect a 100 ohm resistor and AC power meter (or voltmeter) across the headset output.4. Turn up the volume control on the Comm radio to make sure the output power can be greaterthan 280 milliwatts (5.92 Vrms across 100 ohms).5. Measure across the headset output using an audio distortion analyzer.6. Repeat for 350 Hz and 2.5 kHz.Audio distortion: 350 Hz = ___ NMT 12% 1 kHz = ___ 5% 2.5 kHz = ___ NMT 5%Speaker Distortion1. Inject a 1000 μV RF signal with 85% AM modulation at 1 kHz into the Comm antenna port.2. Channel the Comm to the same frequency as the signal generator.3. Connect a 4 ohm resistor and AC power meter (or voltmeter) across the speaker output.4. Turn up the volume control on the Comm radio to make sure the output power can be greaterthan 12 watts (6.93 Vrms volts across 4 ohms).5. Measure across the speaker output using an audio distortion analyzer.6. Repeat for 350 Hz and 2.5 kHzAudio distortion: 350 Hz = ___ NMT 12% 1 kHz = ___ 5% 2.5 kHz = ___ NMT 5% |
Related manuals for Garmin APOLLO GX SERIES
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine