UsingDirect-ToPressing the Direct-To key sets the From locationas your present position. When using the Direct-Tofunction, the From waypoint identifier isoverwritten with the word “Direct.” If you removethe Direct-To position with the Del? option, the oldFrom waypoint is returned to that position. If youedit the From position, Direct-To navigation will bereplaced by the new entered waypoint. ActivatingDirect-To will disable Parallel Track.1. Press the Direct-To key.2. Select the waypoint using the Small and Largeknobs.3. Press ENT.Direct-ToOBSPressing the Direct-To key twice starts the OBSdesired track editor. This feature is useful fordefining the inbound course for holding patterns.OBS Desired Track allows entry of a desired trackto the current To waypoint. The current desiredtrack in the navigation pages will be replaced by theOBS Desired Track value entered. Waypointsequencing at the To waypoint is automaticallyinhibited; placed on Hold.1. Press Direct-To twice. The first character of theDesired Track value will flash. Turn the Small knobto change the value. This value defaults to thecurrent inbound course for the active waypoint.OBS DTK: 3290 to SLE2. Turn the Large knob to move to the next character.Turn the Small knob to change the value.OBS DTK: 2790 to SLE3. Press ENT when the desired track value iscomplete.36Navigation BasicsENTDENTD
