5.3.3 6 9 B Miscellaneous Setup OptionsThis menu allows the installer to set up various options on the GMX 200. Modifications can be madeusing the line select key beside the appropriate function to cycle through available selections. Record allof the settings in the checkout log sheet provided in X Table 5-3X.1. If not already on the Misc Setup Options menu, press the MISC smart key to bring up the MiscSetup Options menu. Configure the options as required to match the installation.a. Ownship Broadcast Flight ID (only required if UAT/ADS-B system is installed):Selections: Up to eight alpha-numeric charactersPress the line select key for this option to allow editing of the Flight ID. Use the smart keys toenter/edit up to 8 characters, and press the MENU/ENTER key when done.b. Ownship Symbol:Selections: Single Engine, Twin Engine, Jet, HelicopterSelect the type of ownship symbol to be displayed on the map pages.c. Terrain Clearance Mode:Selections: Normal, SpecialSet to Normal for all operations.d. Demo Mode (Not for Flight):Selections: Disabled, EnabledSelect Disabled for all aircraft installations. Selecting Enabled causes the GMX 200 tooperate in demo mode and simulate many of its inputs.e. Radar Indicator:Selections: All, 1, 2Select the Radar Indicator number that the GMX 200 will be in the installation. This numbershould match the indicator number for the channel of the radar to which the GMX 200’sARINC 429 control lines are connected. The ALL option must be selected when the GMX200 is connected to a GWX 68. The ALL option is not recommended when there are multipleradar control/display devices being used.Page 5-10 GMX 200 Installation ManualRevision F 190-00607-04