Garmin GMX 200 Installation Manual

Also see for GMX 200: Pilot's guide Reference guide Installation Pilot's Guide & Reference Specification

Contents

5.3.4 7 0 B ChartView ActivationThe GMX 200 can display Jeppesen charts using the optional ChartView feature, which must beactivated. This section describes how to activate the ChartView feature in the GMX 200.1. Turn the GMX 200 off.NOTEThe ChartView Activation Card only can only be used on oneGMX 200. A new ChartView Activation card must be used for eachGMX 200 that has the ChartView feature activated.2. Remove the database SD card from the front SD card slot and insert a ChartView Activation CardP/N 010-00489-50.3. Turn the GMX 200 on – the GMX 200 will begin activating the ChartView feature.4. Wait for the message “ChartView Feature Unlocked. Please restart unit.” to appear. Turn off theGMX 200, remove the activation card and insert the database card that was previously removed.5. Turn on the GMX 200 and wait for the power up sequence to complete6. Repeatedly press the FN key to display the available functions. Verify that the CHART function isnow available.NOTEThe ChartView Activation Card must not be used to store database files,including NavData, SafeTaxi, FliteChart, and ChartView.5.3.5 7 1 B Activation of GDL 69 XM Satellite RadioRefer to the latest revision of 190-00355-04 for activating XM Satellite Radio.5.3.6 7 2 B Activation of the AV-300/350 FIS Datalink RadiosRefer to the latest revision of 190-00607-07 contained in the WSI Activation Kit for activating the WSIFIS function in the GMX 200. The GMX 200 does not support the Sirius Satellite Radio audio function.A subscription from WSI is required to receive FIS weather products. A separate subscription is requiredto receive Sirius Satellite Radio audio. For both, refer to the WSI-AV300/350 Install Manual forinstructions.Page 5-12 GMX 200 Installation ManualRevision F 190-00607-04