3 - DIRECT-TO63190-00356-00 Rev GSelecting a Direct-To Waypoint from the Ac-tive Flight PlanIf you’re navigating an active flight plan, any way-point contained in the flight plan may be selected asa direct-to waypoint from the select direct-to waypointpage. (see Section 4 - Flight Plans, for more informationon flight plans.)To select a direct-to waypoint from the activeflight plan:1. Press the direct-to key. The select direct-towaypoint page will appear, with the waypointidentifier field highlighted.2. Turn the large right knob to highlight theflight plan (FPL) field.3. Turn the small right knob to display a windowshowing all waypoints in the active flightplan.4. Continue turning the small right knob toscroll through the list and highlight the desiredwaypoint.5. Press ENT to confirm the selected waypoint,and ENT to activate the direct-to function.Selecting the Nearest Airport as a Direct-ToWaypointThe select direct-to waypoint page always displaysthe nearest airports (from your present position) onthe NRST field. Navigating directly to a nearby airportis always just a few simple steps away. (Nearby airportsmay also be selected as direct-to waypoints using thesteps described Section 7 - NRST Pages - Navigating toa Nearby Waypoint.)To select a nearby airport as a direct-to waypoint:1. Press the direct-to key. The select direct-towaypoint page will appear, with the waypointidentifier field highlighted.2. Turn the large right knob to highlight thenearest airport (NRST) field.3. Turn the small right knob to display a windowshowing up to nine nearby airports.4. Continue turning the small right knob toscroll through the list and highlight the desiredairport.5. Press ENT to confirm the selected airport, andENT to activate the direct-to function.NOTE: Performing a direct-to the MAP of an ac-tive approach will cancel approach mode.Selecting a Waypoint
