4 - FLIGHT PLANS75190-00356-00 Rev GActive Flight Plan Options3. A second window will appear listing availablerunways for the transition. Turn the smallright knob to highlight the desired runwayand press ENT.4. With “Load?” highlighted, press ENT.Select DepartureSelect Departure? allows you to select a pub-lished standard instrument departure (SID) for thedeparture airport, or replace the current departurewith a new selection. When using a direct-to, the400W-series will use the nearest airport as a referencewhen displaying available departures. See Sec 5 - Pro-cedures for information on selecting departures usingthe PROC key.To select a departure for the departure airport:1. Select the “Select Departure?” option fromthe active flight plan page options and pressENT.2. A window will appear listing the availabledepartures for your departure airport. Turnthe small right knob to select the desireddeparture and press ENT.3. A second window will appear listing availabletransitions for the departure. Turn the smallright knob to highlight the desired transitionwaypoint and press ENT.4. With “Load?” highlighted, press ENT.Remove Approach, Arrival, or DepartureRemove Approach? deletes the currently selectedapproach from the active flight plan. Remove Arrival?deletes the current Arrival (STAR) from the activeflight plan. Remove Departure? deletes the currentdeparture (SID) from the active flight plan.To remove an approach, arrival or departure fromthe active flight plan:1. Press MENU and turn the large right knobto select the “Remove Approach?”, “RemoveArrival?” or “Remove Departure?” option fromthe active flight plan page options and pressENT.2. A confirmation window will appear listingthe procedure you are about to remove. With“Yes?” highlighted, press ENT.Closest Point of FPLClosest Point of FPL? calculates the bearing andclosest distance that a flight plan will pass from a refer-ence waypoint. May also be used to create a new userwaypoint along the flight plan at the location closest tothe reference waypoint.
