Garmin GPSMAP 2106, 2110 Owner's Manual

Also see for GPSMAP 2106 - Marine GPS Receiver: Quick reference guide Install guide Installation instructions

Contents

Garmin GPSMAP 2106, 2110 Owner's Manual Manual pdf 25 page image

GPSMAP 2106/2110 Owner’s Manual 17BASIC OPERATION > R EVIEWING AND EDITING WAYPOINTSUsing Waypoint ListsThe Points tab on the Main Menu has two sub tabs, User and Proximity, whichallows you to manage a large number of waypoints quickly and efficiently. TheProximity sub tab also provides a continuously updated proximity waypoint alarmthat you can use to define an alarm circle around submerged hazards or shallowwaters.To access the Points tab from the Main Menu:1. Press and hold ADJ/MENU to open the Main Menu.2. Use the ROCKER to highlight the Points tab, and highlight either the Useror Proximity sub tab.Sub tabsUser WaypointsThe User sub tab on the Points tab shows a master list of all waypoints currentlystored in memory. From the User sub tab, you can review, edit, rename, or deleteindividual waypoints, or delete all user waypoints. The number of available andused waypoints are shown at the bottom of the User sub tab. Stored waypoints arearranged in alphanumeric order.To scroll through and review the waypoint list:1. Use the ROCKER to highlight the Points tab on the Main Menu, and thenhighlight the User sub tab.2. Press up or down on the ROCKER to scroll through the list of waypoints;press right or left on the ROCKER to scroll by page.3. Press ENTER to review the highlighted waypoint on the Review WaypointPage. See page 15 for information on reviewing and editing waypoints.4. Press the Next soft key to return to the waypoint list. The next waypoint inthe list is automatically highlighted.Deleting WaypointsThe following soft keys are available when you highlight a waypoint on the Usersub tab:• New Waypoint—creates a new waypoint.• Delete—deletes the selected waypoint from the list and from any route inwhich the waypoint was used.• Del by Smbl—deletes waypoints that use the same symbol.• Delete All—deletes all waypoints from the unit.NOTE: When you delete a waypoint from the list, it cannot be recovered fromthe unit. Save important waypoints to a data card, or write them down.