Garmin GPSMAP 2106, 2110 Owner's Manual

Also see for GPSMAP 2106 - Marine GPS Receiver: Quick reference guide Install guide Installation instructions

Contents

Garmin GPSMAP 2106, 2110 Owner's Manual Manual pdf 37 page image

GPSMAP 2106/2110 Owner’s Manual 29BASIC OPERATION > C REATING AND USING ROUTESPlanning RoutesAfter you create a route, you can enter information on the Plan Route windowsuch as your speed, departure time, fuel flow, and departure date so yourGPSMAP 2106/2110 can estimate information about your trip.To plan your route:1. Press the Plan soft key on the Route list to open the Plan Route window.2. Enter planning data for speed and fuel flow. You can also enter the dateand time of your departure. As you enter planning information, the fieldson the Route list are automatically calculated.NOTE: Fuel flow rates are measured in units per hour. System setting changesfor units of measure (statute, nautical, or metric) do not affect the fuel flowmeasure. You should enter fuel flow rates based on available information foryour boat (operators manual, performance specifications) and note the units ofmeasure (gallons, liters, and so on).3. Press QUIT to return to the Route List.To change the data column (Plan Route feature):1. On the Route list, highlight the adjustment button to the right of theCourse column header, and press ENTER. The middle title is highlighted.Planningfeatures2. Press left or right on the ROCKER to select one of nine available planningfeatures, including ETA (Estimated Time of Arrival at point), Fuel (to point),Leg Dist, Leg Fuel, Leg Time, Sunrise, Sunset (at point location), andTime To (point).The unit automatically recalculates each waypoint in the route based onthe planning feature selected.3. Press ENTER when you are finished.