Garmin GPSMAP 2106, 2110 Owner's Manual

Also see for GPSMAP 2106 - Marine GPS Receiver: Quick reference guide Install guide Installation instructions

Contents

Garmin GPSMAP 2106, 2110 Owner's Manual Manual pdf 33 page image

GPSMAP 2106/2110 Owner’s Manual 25BASIC OPERATION > C REATING AND USING ROUTESTo stop navigating a route:Press NAV, highlight Stop Navigation on the Navigation menu, and pressENTER.The following options are available on the Navigation menu by pressing NAVwhile navigating a route:• Invert Route—reverses the route so you can follow it from the end pointback to the beginning.• Re-Evaluate Route—recalculates and reactivates the current route data;and it selects the route leg closest to your current location as the active leg(the active leg defines the current from and to waypoints).Creating a Quick NAV RouteUse the Create QUICK soft key to create a quick route that you can beginnavigating immediately.To create and navigate a QUICK NAV route:1. Press NAV/MOB, and highlight Follow Route.2. Press the Create QUICK soft key.3. Use the map pointer to select a waypoint or map item, and press ENTER.As you add each new waypoint to the route, the data window at the topof the Map Page shows the waypoint or map item name, bearing anddistance from your location, and coordinates of the map pointer. Thebottom of the screen shows the number of available points. A route lineappears on the map to indicate each completed leg, and a dotted lineappears indicating the distance and bearing to the arrow pointer from thelast route waypoint.4. Repeat step 3 until you finish adding all route waypoints.5. Press QUIT twice to start your quick nav route.Copying a RouteUse the Copy soft key on the Route tab to copy an existing route.To copy a route:1. Press and hold ADJ/MENU to open the Main Menu, and then highlight theRoutes tab.2. Use the ROCKER to select the route you want to copy, and press theCopy soft key. The map window for the new route opens. The copiedroute uses the same route name with an additional number (starting at 1)at the end of the route name.