GPSMAP 496 Owner’s Manual 4AviationAviation Mode Pages > Panel PageSetting Up the Panel PageYou can set the bug indicator and change the CDI scale to suit yourneeds.To set a user-defined bug heading reference:1. When the Panel Page appears, press MENU to show the PanelPage options menu.2. Highlight Set Bug Indicator, and press ENTER.3. Highlight User Selected, and press ENTER. A window appearsat the center of the HSI, showing the current bug indicatorsetting.4. Select the heading reference by pressing left or right on theROCKER. Press ENTER. The bug indicator remains fixed on theselected heading until a new bug heading is chosen.To change the CDI scale:1. With the Panel Page shown, press MENU to show the PanelPage options menu.2. Use the ROCKER to highlight Set CDI Scale, and press ENTER.A window appears at the center of the HSI, showing the scalesettings. The current setting is highlighted.3. Use the ROCKER to select the scale, and press ENTER.Manually Setting a CourseUse the Set oBS and Hold option to manually set your course tothe destination.To manually set a course to the destination waypoint:1. With the Panel Page shown, press MENU to show the PanelPage options menu.2. Highlight Set OBS and Hold, and press ENTER. An OBS datafield appears on the screen. Keep in mind that you must have adestination waypoint selected.3. Select the OBS course by pressing the ROCKER left and right.Press ENTER. The course deviation needle and course pointernow provide steering guidance to the selected course.To release the waypoint hold and return to automatic sequencingof route waypoints, press MENU. Highlight Release Hold, andpress ENTER.To cancel the OBS course and reset a direct course to thewaypoint, press Direct To , highlight Resume Route, andpress ENTER to re-start the route.
