Garmin GPSMAP 695/696 Owner’s Manual 190-00919-00 Rev. GAppendix D210OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndexINFORMATION ABOUT USB DRIVERSWhen connecting the GPSMAP 695/696 to a USB port, the computer prompts you tolocate the destination of the drivers for the device (a USB drivers CD is included). Onlyinstall the drivers once. After the drivers are installed, your computer always detectsyour GPSMAP 695/696 when it is connected. USB driver updates can be found atwww.garmin.com.USING XIMAGE FOR CUSTOMIZED WAYPOINT SYMBOLSxImage allows you to exchange images between your PC and your GPSMAP 695/696.You can download and save screen shots of any screen shown on your unit. xImagealso allows you to download customized splash screens and waypoint symbols fromcompatible GPS units, customize them (if you have an image editing program on yourPC), and send them back to your GPS unit.You can download xImage from the Garmin Web site at www.garmin.com/ximage.Refer to the help file for complete instructions about using xImage.CONNECTING THE GXM 40 ANTENNA (GPSMAP 696)Connect the GXM 40 antenna to the GPSMAP 696 to access SiriusXM SatelliteWeather and SiriusXM Radio. For more information about the GXM 40 antenna, seethe GXM 40 Owner’s Manual.NOTE: You must subscribe to SiriusXM Radio and/or SiriusXM WXSatellite Weather to use the SiriusXM Radio and/or SiriusXM Weatherfeatures on your GPSMAP 696.Connecting the GXM 40 antenna:1) Position the antenna where it has a clear view of the sky. This can be onthe outside of the vehicle or behind the windscreen.2) Plug the GXM 40 cable into the USB port on the left side of the unit, asshown in the following illustrations.
