Garmin GPSMAP 695/696 Owner’s Manual190-00919-00 Rev. G 41GPS NavigationOverview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices IndexThe course deviation scale setting is adjustable for Auto, ±0.25, 1.25 or 5.0 (nauticalmile, statute mile, or kilometer) full-scale deflection. The course deviation scale appearson the lower right corner of the HSI. The default setting is Auto, which uses threefactors to determine the distance from the center of the CDI to full left or right limits:• CDI scale = 1.25 - within 30 nm of any airport in the active route.• CDI scale = 0.25 - on an approach leg or within 2 nm of the FAF or MAP.• CDI scale = 5.0 - if the previous two conditions do not exist.Displaying the panel on the map page:From the Map Page press the PANEL Softkey.Or:1) From the Map Page press the MENU Key to display the Map Page Menu.2) Turn or move the FMS Joystick to highlight ‘Select Page Layout’ and pressthe ENT Key.3) Turn or move the FMS Joystick to highlight ‘Map with Panel’ and press theENT Key.CHANGING THE CDI SCALEThe CDI scale can be set from the Map Page Menu.Changing the CDI scale:1) From the Map Page with the Panel, HSI, or Compass Arc displayed, pressthe MENU Key to display the Map Page Menu2) Turn or move the FMS Joystick to highlight ‘Set CDI Scale’, and press theENT Key. The ‘Set CDI Scale’ Menu appears.3) Turn or move the FMS Joystick to highlight the desired menu option, andpress the ENT Key.Map Page Menu Set CDI Scale Menu