Garmin GPSMAP 695/696 Owner’s Manual190-00919-00 Rev. G 69GPS NavigationOverview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices Index3) Turn the FMS Joystick clockwise to begin entering the identifier (turningit counter-clockwise brings up the waypoint selection submenu - press theCLR Key to remove it), or move the FMS Joystick to select the facility name,or city field.4) Press the ENT Key.Or:1) Press the NRST Key.2) Turn the FMS Joystick to select the Nearest NDBs Page.3) Press the FMS Joystick to activate the cursor.4) Turn the FMS Joystick to highlight the desired NDB.5) Press the ENT Key to display the NDB Information Page.VORSVORs can be viewed from the Waypoint Page or the Nearest NDBs Page. In additionto displaying a map of the currently selected VOR and surrounding area, the pagedisplays the region, city, state, bearing, distance, latitude, longitude, frequency andclass (High, Low, or Terminal VOR).The Nearest VOR Page can be used to quickly find a VOR close to the flight path.The list only includes VORs that are within 200nm. If there are no VORs in the list, textindicating that there are no nearest VORs is displayed. If there are no nearest VORs inthe list, the information and frequency fields are dashed.Localizer information cannot be viewed on the VOR Information Page. If a VOR stationis combined with a TACAN station it is listed as a VORTAC on the VOR InformationPage and if it includes only DME, it’s displayed as VOR-DME.Select an VOR:1) From the Waypoint Page, press the INFO Softkey.2) Press the FMS Joystick to activate the cursor.3) Turn the FMS Joystick clockwise to begin entering identifier (turning itcounter-clockwise brings up the waypoint selection submenu - press theCLR Key to remove it), or move the FMS Joystick to select the facility name,or city field.4) Press the ENT Key.