Garmin Rino 110 Owner's Manual And Reference Manual

Also see for RINO 110 - Hiking GPS Receiver: Technical spesification Features Specification Quick start guide Owner's manual

Contents

Garmin Rino 110 Owner's Manual And Reference Manual Manual pdf 23 page image

13New Contact Page - OverviewThe first time that a signal is received from anotherRino user, a ‘New Contact’ page will be displayed. Fromthe New Contact page you can show their location onyour map, ‘Goto’ their location, or select ‘OK’ to addthem to your contact list. The Rino can manage up to 50contacts at any time. Each time that you receive a signalfrom a contact, your map will be updated showing theirnew position and a Track Log of their movement willbe created and shown on your map (see pg. 45). After acontact has been established, a “ Updated”message will briefly appear at the bottom of your displayeach time the contact updates via peer-to-peer or polling.You may also review each contact’s information such asDirection, Elevation, Timestamp, Location and enterNotes up to 30 characters.All contacts are listed on a Contact List Page andalso displayed in the Contact Bar on the Map Page (seepg. 16). Contacts behave like and count towards the 500maximum waypoint total.To accept a new contact:1. When a new contact is received, the New Contactpage will appear. Highlight ‘OK’ and press IN on theTHUMB STICK. If you do not OK the contact, it willnot be saved.To review a contact and contact details:1. From the Map Page, highlight the desired contactof the Contact Bar and press IN on the THUMBSTICK.As you highlight the contacts on the Contact Bar,the Map page will center the map on that contactand display its name, direction and distance nearthe top of the screen.or2. Press the THUMB STICK IN and hold it until theShortcuts Menu is displayed.3. Highlight ‘Find ‘N Go’ and press the THUMB STICKIN.4. Highlight ‘Contacts’ and press the THUMB STICKIN. (contd.)Position ReportingContactsNew Contact PageName &SymbolContactInformationField