Garmin StreetPilot III Owner's Manual & Reference

Also see for StreetPilot III: Owner's manual Quick reference guide Specification Quick start guide Owner's manual and reference guide

Contents

41MapSource/System InformationReferenceMapSource Information PageThe MapSource Info option displays version and map name(s) for any MapSource CD-ROM datastored on an installed cartridge. A box appears to the immediate left of each map name (directly under‘Enabled’). When the box is checked, the designated map data will appear on the map — at the appro-priate map scales and when within the boundaries of that map area.To turn individual MapSource maps on or off:1. MapSource data must first be uploaded to a cartridge and installed in your StreetPilot III.2. Select the ‘MapSource Info’ option from the Main menu, then use the ROCKER KEYPAD to scrollthrough the list of available maps.3. If a check mark appears in the box to the left of a map name, that map is turned on and will appearon the map display (maps that are disabled cannot be used for routing). If necessary, highlight thename of any listed map and press ENTER to add or remove the check mark.For more information on MapSource and data cards, see pages 62-63.System Information PageThe System Info window shows the unit software version and unit ID number.System Setup PagesMuch as the GPS Info, MapSource Info and System Info pages, the System Setup pages can beaccessed by pressing the MENU key twice from any page to display the Main menu. Select SystemSetup and press ENTER. This group of pages is used to perform various System Setup functions.Each selectable page is denoted by a ‘file tab’ at the top that identifies the function of that page.Check the box for the MapSource data that you wantdisplayed on the map.The System Information page