Garrett CS 5000 User Manual

Also see for 11674xx: Owner's manual

Garrett CS 5000 User Manual Manual pdf 11 page image

CS 5000User Manual©2009 GARRETT METAL DETECTORS 11 PN 1530100 REV H3. INSTALLATION INSTRUCTIONS3.1 SITE SELECTIONThe Garrett CS 5000 should be located on a level, stable floor with no large metal items within three(3) feet. Any nearby large metallic object can interfere with operation of the detector. Moving metallicobjects, such as an escalator or revolving door, close to the detector can cause false alarms. Suchalarms can also be caused by electrical interference from radio telephones, television monitors, power-ful electronic motors and transformers, power cables and control circuits.Garrett’s special built-in circuitry is designed to suppress much of this electronic noise, especially X-ray monitor horizontal synchronization signals and closed circuit television. Multiple frequencies permitseveral CS 5000 units to operate simultaneously, in close proximity.For information concerning the operation of multiple units, see Section 11.3.The site for a CS 5000 should be selected with requirements for its pedestrian traffic and use in mind;i.e. space for waiting lines, operators and areas for hand-scanning. Although the detector is effectivewith traffic moving in either direction, best results are obtained when traffic enters from the side oppo-site to the control touchpads and LCD display.Locate the archway where it will not be subject to rain, mist or condensation. Protect the power cablefrom pedestrian as well as vehicular traffic.3.2 ASSEMBLYNOTE: COMPLIANCE WITH REGULATORY STANDARDS REQUIRES THAT A CORD SET BEUSED FOR INSTALLATION.3.2.1 Lay out the major pieces of the CS 5000, as shown at the right. Make certain all other attachmentdevices are included. These should include:• Detection Panel A• Detection Panel B• Detection Unit• Crosspiece• Power Cord• 1/4-20x3” Screws (8)• Finishing Washers (8)• Warranty Card• User’s Manual• Operator’s Manual• Instruction Video• Access Code Card• Cord Set17' ACE JUMPER CORD