in.xe TechBook25Parameter Display Options DescriptionOutput 1A --,1H,1L,2H,2L,3H,3L,4H,4L,P5,BL,CP,O3,L2,H Accessory connected to the relay ofOutput 1AOutput 1B --,1H,1L,2H,2L,3H,3L,4H,4L,P5,BL,CP,O3,L2,H Accessory connected to the relay ofOutput 1BOutput 2 --,1H,1L,2H,2L,3H,3L,4H,4L,P5,BL,CP,O3,L2,H Accessory connected to the relay ofOutput 2AOutput 3 --,1H,1L,2H,2L,3H,3L,4H,4L,P5,BL,CP,O3,L2,H Accessory connected to the relay ofOutput 3AOutput 4 --,1H,1L,2H,2L,3H,3L,4H,4L,P5,BL,CP,O3,L2,H Accessory connected to the relay ofOutput 4AOutput 5 --, H Accessory connected to the relay ofOutput 5AOutput Direct Direct = --CP on Direct = CP Set to CP only if the circulation pump isconnect on the DirectCP usage CP Standard = 0CP Always On = 1 Usage of the circulation pumpOzone usage Ozone with filtration = 0Ozone Always On = 1 Usage of the ozone generatorOzone Pump Circulation pump = 0Pump #1 = 1 Pump associated with the ozone generatorOzone Type Standard (UV) = 0Timed (Corona) = 1 Type of ozone generatorHeater Pump Circulation pump = 0Pump #1 = 1 Pump associated with the heaterFilter Config Purge only = 0With Circ Pump = 1With Pump 1, Low speed = 2 Filter cycle configurationTemp Units °F = 0°C = 1 Temperature units used on displayClock Format No time display = 0AM/PM format = 124H format = 2 Clock display formatCool down 30 to 240 seconds Cool down of the heating element insecondsOutput 1A current 1 to 20 amperes Current draw of the accessory connectedto the relay of Output 1AOutput 1B current 1 to 15 amperes Current draw of the accessory connectedto the relay of Output 1BOutput 2 current 1 to 15 amperes Current draw of the accessory connectedto the relay of Output 2AOutput 3 current 1 to 15 amperes Current draw of the accessory connectedto the relay of Output 3AOutput 4 current 1 to 15 amperes Current draw of the accessory connectedto the relay of Output 4AOutput 5 current 1 to 17 amperes Current draw of the accessory connectedto the relay of Output 5ADirect current 0 to 5 amperes Current draw of the Direct outputMinimum inputcurrent 10 to 20 Minimum input current (breaker size)Number of phases 1 or 2 (UL)1, 2 or 3 (CE) Number of Phase / BreakerInput current 10 to 60 A Single Phase (UL and CE)10 to 48 A Dual Phase (UL)10 to 40 A Dual Phase (CE)10 to 20 A Triple Phase (CE)Available household current------------Table 3--------------------------------Number of Phases selectionUL Menu not availableCE 1 or 2UL Swim 1 or 2CE Swim 1, 2 or 3Maximum Input Current1 phase 2 Phases 3 PhasesUL 48 na naCE 40 20 naUL Swim 60 48 naCE Swim 60 40 na