Section 2 • SpecificationsJanuary 2013Part No. 84793 GS-84 • GS-90 2 - 3Hydraulic SpecificationsHydraulic Oil SpecificationsHydraulic oil type Chevron Rando HD equivalentViscosity grade Multi-viscosityViscosity index 200Cleanliness level, minimum 15/13Water content, maximum 200 ppmChevron Rando HD oil is fully compatible andmixable with Shell Donax TG (Dexron III) oils.Genie specifications require hydraulic oils which aredesigned to give maximum protection to hydraulicsystems, have the ability to perform over a widetemperature range, and the viscosity index shouldexceed 140. They should provide excellent antiwear,oxidation, corrosion inhibition, seal conditioning, andfoam and aeration suppression properties.Optional fluidsBiodegradable Petro Canada Environ MV 46Statoil Hydra Way Bio Pa 32BP Biohyd SE-SFire resistant UCON Hydrolube HP-5046Quintolubric 822Mineral based Shell Tellus S2 V 32Shell Tellus S2 V 46Chevron Aviation AArnica 32Continued use of Chevron AviationA hydraulic fluid when ambienttemperatures are consistentlyabove 32°F / 0°C may result incomponent damage.SPECIFICATIONSNote: Use Chevron Aviation A hydraulic fluid whenambient temperatures are consistently below0°F / -17°C.Note: Use Shell Tellus S2 V 46 hydraulic oil whenoil temperatures consistently exceed 205°F / 96°C.Note: Genie specifications require additionalequipment and special installation instructions forthe approved optional fluids. Consult the GenieService Department before use.
