Section 3 • Scheduled Maintenance ProceduresJanuary 2013Part No. 84793 GS-84 • GS-90 3 - 5Maintenance Inspection ReportChecklist B - Rev F Y N RB-1 BatteryB-2 Electrical wiringB-3 Engine air filterB-4 Engine RPMB-5 Exhaust systemB-6 Brake configurationB-7 Tires and wheelsB-8 Drive hub oil levelB-9 Key switchB-10 Emergency StopB-11 HornB-12 Fuel select -Ford modelsB-13 Drive brakesB-14 Drive speed - stowedB-15 Drive speed - raisedB-16 Check Up Limit SwitchB-17 Hydraulic oil analysisB-18 Tank venting systemsPerform every 400 hours:B-19 Engine air filter -Ford modelsB-20 Engine maintenance -Ford modelsChecklist A - Rev F Y N RA-1 Manuals and decalsA-2 Pre-operation inspectA-3 Function testsA-4 Engine maintenance -Ford modelsA-5 Engine maintenance -Deutz modelsA-6 Test the Oscillate AxlePerform after 40 hours:A-7 30 day servicePerform after 50 hours:A-8 Engine maintenance -Deutz modelsPerform every 100 hours:A-9 Engine maintenance -Ford modelsA-10 Filter/separator -Deutz modelsPerform after 150 hours:A-11 Drive hub oilPerform every 200 hours:A-12 Engine maintenance -Ford modelsInstructions• Make copies of this report to use foreach inspection.• Select the appropriate checklist(s) forthe type of inspection to beperformed.Daily or 8 hourInspection: AQuarterly or 250 hourInspection: A+BSemi-annually or 500hour Inspection: A+B+CAnnually or 1000 hourInspection: A+B+C+D2 Year or 2000 hourInspection: A+B+C+D+E• Place a check in the appropriate boxafter each inspection procedure iscompleted.• Use the step-by-step procedures inthis section to learn how to performthese inspections.• If any inspection receives an “N”, tagand remove the machine fromservice, repair and re-inspect it. Afterrepair, place a check in the “R” box.LegendY = yes, acceptableN = no, remove from serviceR = repairedModelSerial numberDateHour meterMachine ownerInspected by (print)Inspector signatureInspector titleInspector companyComments
