Genie Z-60/34 Operator's Manual
Also see for Z-60/34: Operator's manualOperator's manualOperator's manual supplementOperator's manualService manual
                                   | |
30 Genie Z-60/34 Part No. 82315Operator's Manual Fourth Edition · First PrintingFree-wheel Configuration forWinchingChock the wheels to prevent the machine fromrolling.2WD models: Releasethe non-steer wheelbrakes by turning overthe drive hubdisconnect caps.4WD models: Releasethe wheel brakes byturning over all fourdrive hub disconnect caps.Be sure the winch line is properly secured to thedrive chassis tie points and the path is clear of allobstruction.Reverse the procedures described to re-engage thebrakes.Note: The pump free-wheel valve should alwaysremain closed.Note: Towing the Genie Z-60/34 is notrecommended. If the machine must be towed, donot exceed 2 mph / 3.2km/h.Observe and Obey:The transport vehicle must be parked on a levelsurface.The transport vehicle must be secured toprevent rolling while the machine is beingloaded.Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. See the serial plate for themachine weight.Be sure the turntable is secured with theturntable rotation lock before transporting. Besure to unlock the turntable for operation.Transport InstructionsDisengageEngage |
Related manuals for Genie Z-60/34
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine