October 2016 Service and Repair ManualEnginesPart No. 1268558 ZX-135/70 85How to Ins tall the Fl ex PlateHow to Install the Flex Plate1 Install the flex plate onto the engine flywheelwith the rubber vibration isolators towards thepump.2 Use blue thread locking compound and torquethe flex plate mounting bolts in sequence to28 ft-lbs / 38 Nm. Then torque the flex platemounting bolts in sequence to 40 ft-lbs / 54Nm.3 Apply a high viscosity coupling grease (Geniepart number 128025) to the splines of thepump shaft and flex plate.4 Install the pump plate and pump assemblyonto the engine.Grease SpecificationShell Alvania® Grease CG, NLGI 0/1 or equivalent.Deutz and Perkins modelsHow to Install the Pump Plate1 Using a suitable lifting device, install the pumpplate and pump assembly onto the engine.2 Deutz engines: Torque the pump platemounting bolts in sequence to 23 ft-lbs / 31Nm. Then torque the pump plate mountingbolts in sequence to 47 ft-lbs / 63 Nm.3 Perkins engines: Torque the pump platemounting bolts in sequence to 23 ft-lbs / 31Nm. Then torque the pump plate mountingbolts in sequence to 47 ft-lbs / 63 Nm.Perkins 1104D pump platePerkins 854F pump plateDeutz TD2011L04i pump plateDeutz TD2.9 pump plate
