Regulatory Information B-5paper or other objects that will reduce cooling. Do not use the ACadapter while it is inside a carrying case. Connect the adapter to a proper power source. The voltagerequirements are found on the product case and/or packaging. Do not use the adapter if the cord becomes damaged. Do not attempt to service the unit. There are no serviceable parts inside.Replace the unit if it is damaged or exposed to excess moisture.Option ANSI/ISA 12.12.01 & CSA C22.2 No. 213InstructionINSTALLATION INSTURCTIONS:Installation instructions are provided with each device and shall include thefollowing or equivalent wording: This equipment is suitable for use in Class I, Division 2, Groups A, B, C andD OR non-hazardous locations only. WARNING – EXPLOSION HAZARD – Do not disconnect equipment unlesspower has been removed or the area is known to be non-hazardous. WARNING – EXPLOSION HAZARD - Substitution of components mayimpair suitability for Class I, Division 2. WARNING - EXPLOSION HAZARD - External Connections/Hubs are not tobe used in a Hazardous Location. WARNING - EXPLOSION HAZARD - Notebook is to be only powered fromthe battery pack while in Hazardous Locations.About the ModemCaution Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack isspecifically designed for wet locations.
