5-6 Using BIOS Setup and System RecoveryRing Wake Up From S3 allows a modem device activity to wake up thesystem from S3 (Sleep) state.USB Wake Up From S3 allows a USB device activity to wake up thesystem from S3 (Sleep) state.Wake on PCH LAN allows a LAN activity to wake up the system from S3(Sleep) state.System Policy sets if the system always runs at full speed (Performance) orlowers down when its temperature is too high (Balance).AC Initiation sets if connecting AC power will automatically start or resumeyour computer.SATA Mode set toAHCI if your hard disk supports AHCI. AHCI allows you totake advantage of Advanced Host Controller Interface features. The optionsareIDE andAHCI.CAUTION: Incorrect SATA mode settings can result in hard disk drive bootfailure.AMT Configuration configures Active Management Technology parameters.Press Enter to access the submenu as shown below.AdvancedAMT Configuration Item Specific HelpIntel AMT:Intel AMT Setup Prompt:[Disable ][Disabled]Enable/DisableIntel (R) ActiveManagement TechnologyBIOS Extension.Note: iAMT H/W isalways enabled.This option justcontrols the BIOSextension execution.If enabled thisrequires additionalfirmware in the SPIdeviceF1 Help ↑↓ Select Item +/- Change Values F9 Setup DefaultsEsc Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and ExitEnabled
