Operating Your Computer 2-15 The active digitizer feature cannot be used in the BIOS Setup programor when using the full screen in DOS mode.NOTE: You can move the cursor by bringing the digitizer pen close to thescreen, without actually touching the screen’s surface. Do not move the digitizer pen too quickly. If the pen moves too quickly,the cursor may be unable to follow its movement. If you cannot click on the edge of the screen, hold the digitizer penperpendicular to the display and try clicking again.Using Landscape or Portrait ViewTo rotate the display, press the button located on the front of yourcomputer to open the OSD Control Panel and click . Each timethis Rotate button is clicked, the screen display rotates counter-clockwise by90 O .For a Model without WWAN ModulePrimaryLandscapePrimaryPortraitSecondaryLandscapeSecondaryPortraitPrimaryLandscapeDisplay DisplayDisplayDisplay Display
