H3C MSR 20-1X Installation Manual

Also see for MSR 20-1X: Configuration guide Quick start

Contents

H3C MSR 20-1X Installation Manual Manual pdf 25 page image

18• In a cabinet• On a wallInstalling the Router on a WorkbenchIn case that no 19-inch standard cabinet is available, you can put the router on a clean workbench.When installing the router on a workbench,• Make sure that the workbench is stable and well grounded.• Reserve a space of 10 cm (3.9 in.) around the router for heat dissipation.• Do not place heavy objects on the router.Installing the Router on a CabinetDimensionsWith mounting brackets, you can also install MSR 20-1X routers in a 19-inch standard cabinet.The dimensions of MSR 20-1X routers without feet and mounting bracket are 44.2 × 300 × 240 mm (1.74× 11.81 × 9.45 in.).Installation procedureStep1 Check that the cabinet is stable and properly grounded. Attach two mounting brackets to the front or rearpanel of the router with screws.Step2 Put the router in a tray. Depending on the actual situation, slide the router along the guide rails to anappropriate position, keeping a proper distance between the router and guide rails.Step3 Fix the router horizontally by fastening the mounting brackets to the cabinet with appropriate pan headscrews. The specifications of pan head screws should satisfy the installation requirements and rustprooftreatment has been made to their surfaces.Figure 12 Install an MSR 20-1X router in a cabinet(1) Mounting brackets