45Table 19 Main BootWare menuItem Description<1> Boot System Bootstrap.<2> Enter Serial SubMenu Enter the serial interface submenu. For details about thesubmenu, refer to Serial interface submenu on page 45.<3> Enter Ethernet SubMenu Enter the Ethernet interface submenu. For details about thesubmenu, refer to Ethernet interface submenu on page 46.<4> File Control File control submenu. For details about the submenu, refer toFile control submenu on page 46.<5> Modify BootWare Password Modify the BootWare password.<6> Skip Current System ConfigurationBoot the system with the default setting, instead of the currentsystem configuration file. This function takes effect only for thisstartup. It is usually used after you lose your password.<7> BootWare Operation Menu BootWare operation submenu. For details about thesubmenu, refer to BootWare operation submenu on page 47.<8> Clear Super PasswordRemove the super password.You need to use the super password when switching the userlevel. After you select the option, the super password will becleared only at the first reboot. At the next reboot, the superpassword will restore.<9> Storage Device Operation The storage device operation menu, where you can select astorage device.<0> Reboot Reboot the router.BootWare SubmenusSerial interface submenuThrough this submenu, you can upgrade an application program, change the baud rate of a serialinterface, and perform other operations.Enter 2 in the main BootWare menu to enter the serial interface submenu:====================================================|Note:the operating device is flash ||<1> Download Application Program To SDRAM And Run ||<2> Update Main Application File ||<3> Update Backup Application File ||<4> Update Secure Application File ||<5> Modify Serial Interface Parameter ||<0> Exit To Main Menu |==========================================================================Enter your choice(0-5):The submenu is described as follows: