H3C MSR 20-1X Installation Manual

Also see for MSR 20-1X: Configuration guide Quick start

Contents

H3C MSR 20-1X Installation Manual Manual pdf 54 page image

47|<4> Delete File ||<0> Exit To Main Menu |==========================================================================Enter your choice(0-4):The submenu is described as follows:Table 22 File control submenuItem Description<1> Display All File Display all files.<2> Set Application File type Set an application file type.<3> Set Configuration File type Set a configuration file type.<4> Delete File Delete a file.<5> Exit To Main Menu Return to the main BootWare menu.BootWare operation submenuEnter 7 in the main BootWare menu to enter the BootWare operation submenu:=================================================|Note:the operating device is flash ||<1> Backup Full BootWare ||<2> Restore Full BootWare ||<3> Update BootWare By Serial ||<4> Update BootWare By Ethernet ||<0> Exit To Main Menu |==========================================================================Enter your choice(0-4):The submenu is described as follows:Table 23 BootWare operation submenuItem Description<1> Backup Full BootWare Back up the full BootWare.<2> Restore Full BootWare Restore the full BootWare.<3> Update BootWare By Serial Upgrade BootWare through a serial interface<4> Update BootWare By Ethernet Upgrade BootWare through an Ethernet interface<0> Exit To Main Menu Return to the Main BootWare menuUpgrading an Application Program Through anEthernet InterfaceEnter 3 in the BootWare menu to enter the Ethernet interface submenu. For details about the submenu,refer to BootWare Submenus on page 45.