48Configuring Ethernet Interface ParametersBefore upgrading an application program through an Ethernet interface, we need to configure theEthernet interface on the router as follows:Enter 3 in the BootWare menu to enter the Ethernet interface submenu. Then, enter 5 to enter the changeEthernet parameter submenu:==================================================|Note: '.' = Clear field. || '-' = Go to previous field. || Ctrl+D = Quit. |==========================================================================Protocol (FTP or TFTP) :tftp ftpLoad File Name :host:Target File Name :target:Server IP Address :192.168.1.1Local IP Address :192.168.1.253Gateway IP Address :0.0.0.0FTP User Name :userFTP User Password :passwordTable 24 Ethernet parameters settings descriptionParameter Description'.' = Clear field To clear the current field, input a (.) and then press Enter.'-' = Go to previous field To go to the previous field, input a hyphen (-) and then press Enter.Ctrl+D = Quit The shortcut key combination for exiting the parameter configurationpage is Ctrl+D.Protocol (FTP or TFTP) Select a transmission protocol, FTP or TFTP.Load File Name Name of the source file, which must be consistent with the actual nameof the file to be downloaded.Target File Name Name for the target file to be saved. By default, it is the same as thename of the source file on the server.Server IP AddressIP address of the FTP/TFTP server. To set a mask, separate the IPaddress from the mask with a colon (:), for example,192.168.80.10:24.Local IP Address IP address of the local end, that is, the IP address of the FTP/TFTPclient.Gateway IP Address Configure the gateway IP address if the server and the client are noton the same network segment.FTP User Name This option is not available for TFTP.FTP User Password This option is not available for TFTP.
