1-10display stp rootSyntaxdisplay stp rootViewAny viewParametersNoneDescriptionUse the display stp root command to display information about the root ports in the MSTP regionwhere the switch resides.Examples# Display information about the root ports in the MSTP region where the switch resides. display stp rootMSTID Root Bridge ID ExtPathCost IntPathCost Root Port-------- -------------------- ------------ ------------- -----------0 32768.00e0-fc53-d908 0 200 Ethernet1/0/18Table 1-7 Description on the fields of the display stp root commandField DescriptionMSTID MSTI ID in the MST regionRoot Bridge ID ID of the root bridgeExtPathCostCost of the external path from the switch to the root bridge. The devicecan automatically calculate the default path cost of a port, oralternatively, you can use the stp cost command to configure the pathcost of a port.IntPathCostCost of the internal path from the switch to the root bridge. The devicecan automatically calculate the default path cost of a port, oralternatively, you can use the stp cost command to configure the pathcost of a port.Root PortRoot port (If a port on the current device is an MSTI root port, the porttype and port number is displayed. Otherwise, the root port name is notdisplayed.)instanceSyntaxinstance instance-id vlan vlan-listundo instance instance-id [ vlan vlan-list ]ViewMST region view
