1-16info-center trapbufferSyntaxinfo-center trapbuffer [ channel { channel-number | channel-name } | size buffersize ]*undo info-center trapbuffer [ channel | size ]ViewSystem viewParametersize: Sets the size of the trap buffer.buffersize: Size of the trap buffer, represented by the number of messages it holds. It ranges from 0 to1,024 and defaults to 256.channel: Sets the channel through which information is output to the trap buffer.channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the system.channel-name: Channel name. By default, the name of channel 0 to channel 9 is (in turn) console,monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9.DescriptionUse the info-center trapbuffer command to enable information output to the trap buffer.Use the undo info-center trapbuffer command to disable information output to the trap buffer.By default, information output to the trap buffer is enabled with channel 3 (trapbuffer) as the defaultchannel and a maximum buffer size of 256.This command takes effect only after the information center function is enabled.Related command: info-center enable, display info-center.Example# Enable the system to output trap information to the trap buffer, whose size is set to 30. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] info-center trapbuffer size 30reset logbufferSyntaxreset logbuffer [ unit unit-id ]ViewUser viewParameterunit-id: Unit ID of the device, the value can only be 1.DescriptionUse the reset logbuffer command to clear information recorded in the log buffer.Example# Clear information recorded in the log buffer.
