H3C S5120-9P-SI Installation Manual

Contents

H3C S5120-9P-SI Installation Manual Manual pdf 49 page image

41Item Description4. Delete file from flash Delete files from the flash memory5. Modify BootRom password Modify the Boot ROM password6. Enter BootRom upgrade menu Enter the Boot ROM update menu7. Skip current system configuration Skip the current configuration file (this configuration is valid once)8. Set BootRom password recovery Restore the Boot ROM password9. Set switch startup mode Set the startup mode of the switch0. Reboot Restart the switch• If you perform no operation or press a key other than Ctrl + B within one second, once theremaining waiting time becomes zero, the system begins to automatically start up and the followinginformation is displayed:Starting to get the main application file--flash:/S5120-CMW520-A1101.bin!.......................................................................The main application file is self-decompressing.............................................................................................................................................Done!System is starting...User interface aux0 is available.Press ENTER to get started.The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch iscomplete.Press Enter. The following prompt is displayed:You can configure the switch now.Changing the boot modeBy default, the system starts up in fast boot mode. If you want to change the boot mode to normal, pressCtrl + B within one second to enter the Boot ROM menu showed below:BOOT MENU1. Download application file to flash2. Select application file to boot3. Display all files in flash4. Delete file from flash5. Modify BootRom password6. Enter BootRom upgrade menu7. Skip current system configuration8. Set BootRom password recovery9. Set switch startup mode0. RebootEnter your choice(0-9):