H3C S5510 Series Command Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Operation manual

Contents

H3C S5510 Series Command Manual Manual pdf 10 page image

Command Manual – AAA&RADIUS&HWTACACSH3C S3610&S5510 Series Ethernet SwitchesChapter 1 AAA & RADIUS & HWTACACSConfiguration Commands1-7nas-ip ip-address: Sets the IP address of the remote access server port to which theuser is bound to. Where, ip-address is in dotted decimal notation and is 127.0.0.1(representing this device) by default. If the user is bound to a remote port, you mustspecify the nas-ip parameter. If the user is bound to a local port, you need not specifythe nas-ip parameter.port port-number: Sets the port bound with the user.DescriptionUse the attribute command to set the attributes of a user whose service type islan-access.Use the undo attribute command to cancel attribute settings of the user.Related command: display local-user.Example# Set the IP address of user1 to 10.110.50.1. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] local-user user1[Sysname-luser-user1] attribute ip 10.110.50.11.1.7 authentication defaultSyntaxauthentication default { radius-scheme radius-scheme-name [ local ] |hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none }undo authentication defaultViewISP domain viewParameterradius-scheme-name: Name of RADIUS scheme, a string not exceeding 32 characters.hwtacacs-scheme-name: Name of HWTACACS scheme, a string not exceeding 32characterslocal: Local authentication.none: No authentication.DescriptionUse the authentication default command to configure authentication scheme for allusers.