H3C S5510 Series Command Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Operation manual

Contents

H3C S5510 Series Command Manual Manual pdf 27 page image

Command Manual – AAA&RADIUS&HWTACACSH3C S3610&S5510 Series Ethernet SwitchesChapter 1 AAA & RADIUS & HWTACACSConfiguration Commands1-24[Sysname-luser-user1] level 31.1.22 local-userSyntaxlocal-user user-nameundo local-user { user-name | all [ service-type { lan-access | telnet | ssh | terminal| ftp } ] }ViewSystem viewParameteruser-name: Name of the local user, a character string of up to 80 characters. This stringcannot contain the following characters: /:*?<>. It can contain no more than one @character. The pure user name (user ID, that is, the part before @) cannot be longerthan 55 characters. User names are case-sensitive. For example, the system regardsUserA and usera as two different users.all: Specifies all local users.service-type: Specifies the local users of the specified type. You can specify one of thefollowing user types: ftp, lan-access (generally, this type of users are Ethernet accessusers, for example, 802.1x users), ssh, telnet, and terminal (this type of users areterminal users who log into the switch through the Console port).DescriptionUse the local-user command to add a local user and enter local user view.Use the undo local-user command to delete one or more specified local users.By default, there is no local user in the system.“a”, “al”, “all” cannot be name of the local user.Related command: display local-user and service-type.Example# Add a local user named user1. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] local-user user1[Sysname-luser-user1]