H3C S5510 Series Command Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Operation manual

Contents

H3C S5510 Series Command Manual Manual pdf 33 page image

Command Manual – AAA&RADIUS&HWTACACSH3C S3610&S5510 Series Ethernet SwitchesChapter 1 AAA & RADIUS & HWTACACSConfiguration Commands1-30After an ISP domain is set to the block state, except the online users, the users underthis domain are not allowed to access the network.After the local user is set to the block state, the user is not allowed to access thenetwork.Related command: domain.Example# Set the ISP domain aabbcc.net to the block state, so that all its offline users cannotaccess the network. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] domain aabbcc.net[Sysname-isp-aabbcc.net] state block# Set user1 to the block state. system-view[Sysname] local-user user1[Sysname-luser-user1] state block1.2 RADIUS Configuration Commands1.2.1 data-flow-formatSyntaxdata-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet{ giga-packet | kilo-packet | mega-packet | one-packet } }*undo data-flow-format { data | packet }ViewRADIUS scheme viewParameterdata: Sets the unit of measure for data.byte: Specifies to measure data in bytes.giga-byte: Specifies to measure data in gigabytes.kilo-byte: Specifies to measure data in kilobytes.mega-byte: Specifies to measure data in megabytes.packet: Sets the unit of measure for packets.giga-packet: Specifies to measure packets in giga-packets.kilo-packet: Specifies to measure packets in kilo-packets.