Command Manual – AAA&RADIUS&HWTACACSH3C S3610&S5510 Series Ethernet SwitchesChapter 1 AAA & RADIUS & HWTACACSConfiguration Commands1-58 system-viewSystem View: return to User View with Ctrl+Z.[Sysname] radius scheme radius1New Radius scheme[Sysname-radius-radius1] timer quiet 101.2.28 timer realtime-accountingSyntaxtimer realtime-accounting minutesundo timer realtime-accountingViewRADIUS scheme viewParameterminutes: Real-time accounting interval. It ranges from 3 minutes to 60 minutes andmust be a multiple of 3. By default, this interval is 12 minutes.DescriptionUse the timer realtime-accounting command to set the real-time accounting interval.Use the undo timer realtime-accounting command to restore the default real-timeaccounting interval.Note that:z To charge the users in real time, you should set the interval of real-time accounting.After the setting, the switch sends the accounting information of online users to theRADIUS server at regular intervals.z The setting of the real-time accounting interval depends to some degree on theperformance of the switch and the RADIUS server. The higher the performance ofthe switch and the RADIUS server is, the shorter the interval can be. You arerecommended to set the interval as long as possible when the number of users isrelatively great (ú1000). Table 1-5 lists the numbers of users and thecorresponding recommended intervals.Table 1-5 Numbers of users and corresponding recommended intervalsNumber of users Real-time accounting interval1 to 99 3100 to 499 6500 to 999 12