121MainBoard:Current startup saved-configuration file: flash:/startup.cfgNext main startup saved-configuration file: flash:/startup.cfgNext backup startup saved-configuration file: NULLTable 17 Command outputField DescriptionMainBoard Displays the startup configuration files on the IRF master.Current Startup saved-configuration file Configuration file that the device has started up with.Next main startup saved-configuration file Main configuration file to be used at the next startup.Next backup startup saved-configuration file Backup configuration file to be used at the next startup.(This file does not exist.) If the specified next-startup configuration file has beendeleted, this comment appears next to the file name.Slot 2 Displays the startup configuration files on IRF member 2.Related commandsstartup saved-configurationdisplay thisUse display this to display the running configuration in the current view.Syntaxdisplay this [ by-linenum ] [ | { begin | exclude | include } regular-expression ]ViewsAny viewDefault command level1: Monitor levelParametersby-linenum: Displays the number of each line.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Usage guidelinesUse this command to verify the configuration you have made in a certain view.Typically, this command does not display parameters that are set to their default settings.Some parameters can be successfully configured even if their dependent features are not enabled. Forthese parameters, this command displays their settings after the dependent features are enabled.
