1642 4 Ver.B NULL 001 NULL IVL LSW1XP4P0 NormalThe output shows that the IRF fabric comprises two member devices, each of which has 28 Ethernetinterfaces and is configured with two 10 GE physical IRF ports.Table 26 Command outputField DescriptionSlot 1 Information about IRF member device 1.SubSNo Number of the slot in which the switch or subcard resides.PortNum Maximum number of ports that the switch or subcard supports.PCBVer PCB version of the switch or subcard.FPGAVer FPGA version of the switch or subcard.CPLDVer CPLD version of the switch or subcard.BootRomVer Boot ROM version of the switch or subcard.AddrLMAddress learning mode:• Independent VLAN learning (IVL).• Shared VLAN learning (SVL).Type Type of the switch or subcard.StateState of the switch or subcard:• Normal—The switch or subcard is operating properly.• Absent—The switch or subcard is not present.• Fault—The switch or subcard is faulty.display device manuinfoUse display device manuinfo to display the electronic label data for the device.Syntaxdisplay device manuinfo [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]ViewsAny viewDefault command level3: Manage levelParametersslot slot-number: Displays the electronic label data for an IRF member device. The slot-number argumentrepresents the IRF member ID of the device. If no IRF member device is specified, this command displaysthe electronic label data for all IRF member devices.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.
