52Examples# Set the terminal display type to VT100. system-view[Sysname] user-interface vty 0[Sysname-ui-vty0] terminal type vt100user privilege levelUse user privilege level to configure the user privilege level. Users logging into the user interface areassigned a user privilege level.Use undo user privilege level to restore the default.Syntaxuser privilege level levelundo user privilege levelDefaultThe command level is 3 for the AUX user interface and 0 for other user interfaces.ViewsUser interface viewDefault command level3: Manage levelParameterslevel: Specifies a user privilege level in the range of 0 to 3.Usage guidelinesThis command is not supported in FIPS mode.User privilege levels include visit, monitor, system, and manage, represented by the number 0, 1, 2 and3 respectively. You can change the user privilege level when necessary.Examples# Set the command level for users logging in through VTY 0 to 0. system-view[Sysname] user-interface vty 0[Sysname-ui-vty0] user privilege level 0After you Telnet to the device through VTY 0, the terminal only displays commands of level 0 in the helpinformation: ?User view commands:archive Specify archive settingsbackup Backup next startup-configuration file to TFTP serverboot-loader Set boot loaderbootrom Update/read/backup/restore bootrombrand Set Original Equipment Manufacturer (BRAND) informationcd Change current directorycfd Connectivity fault detection (IEEE 802.1ag)
