H3C SR6600 Command Reference Manual

Also see for SR6600 SPE-FWM: Configuration guide Configuration guide Configuration guide Command reference Command reference

1-39ViewAny viewDefault Level1: Monitor levelParametersinterface-number: Virtual Ethernet (VE) interface number, which can be the number of any existingLayer 3 VE interface.DescriptionUse the display interface virtual-ethernet command to view information about a Layer 3 VE interface.If you do not provide the interface-number argument, this command displays information about allexisting Layer 3 VE interfaces.Related commands: interface virtual-ethernet.Examples# Display information about interface Virtual-Ethernet 2. display interface virtual-ethernet 2Virtual-Ethernet2 current state: DOWNLine protocol current state: DOWNDescription: Virtual-Ethernet2 InterfaceThe Maximum Transmit Unit is 1500Internet protocol processing : disabledIP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 00e0-fc98-7654IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 00e0-fc98-7654Table 1-7 display interface virtual-ethernet command output descriptionField Descriptioncurrent state Current state of the interface (UP/DOWN)Line protocol current state State of the data link layer protocol (up or down)Description Description of the interfaceThe Maximum Transmit Unit MTU of the interfaceInternet protocol processing State of the network layer protocol (enabled or disabled)IP Packet Frame Type Encapsulation format for IPv4 packetsIPv6 Packet Frame Type Encapsulation format for IPv6 packetsinterface virtual-ethernetSyntaxinterface virtual-ethernet interface-numberundo interface virtual-ethernet interface-numberViewSystem view