H3C SR6600 Configuration Manual

Also see for SR6600 SPE-FWM: Configuration guide Configuration guide Command reference Command reference Command reference

Contents

6-15To do… Use the command… RemarksEnter system view system-view —Create a class and enter class view traffic classifier tcl-name[ operator { and | or } ]RequiredBy default, the and keyword isused. That is, the relation betweenmatch criteria is logical AND.Configure match criteria if-match [ not ] match-criteria RequiredDefining a Traffic BehaviorTo define a traffic behavior, create the traffic behavior first and then configure QoS attributes in trafficbehavior view.Configure AF and the minimum guaranteed bandwidthFollow these steps to configure AF and the minimum available bandwidth:To do… Use the command… RemarksEnter system view system-view —Create a traffic behavior and entertraffic behavior view traffic behavior behavior-nameRequiredThe specified behavior namecannot be the name of anysystem-defined behavior.Configure AF and the minimumguaranteed bandwidthqueue af bandwidth { bandwidth |pct percentage } Requiredz You can apply this traffic behavior only to the outgoing traffic of an interface or ATM PVC.z To reference both the queue ef command and the queue af command in a policy, you mustconfigure them in the same unit (either bandwidth or percentage). If not, your referencing attemptswill fail.Configuring EF and the maximum bandwidthFollow these steps to configure EF and the maximum bandwidth:To do… Use the command… RemarksEnter system view system-view —Create a traffic behavior and entertraffic behavior view traffic behavior behavior-nameRequiredThe specified traffic behaviorname cannot be the name of anysystem-defined behavior.Configure EF and the maximumbandwidthqueue ef bandwidth { bandwidth[ cbs burst ] | pct percentage[ cbs-ratio ratio] }Required