HAKO Hamster 800 V Operating Instructions Manual

HAKO Hamster 800 V Operating Instructions Manual Manual pdf 30 page image

30Operation• Secure the machine at the front witha strap which must be fed throughthe two openings (Fig. 13/1) near thefront wheel (Fig. 13/2).• At the rear, thread a strap around thebottom ends of the handlebar and fixthe strap to the transporter.Fig. 133.4 Function faults• If the machine is overloaded, theengine speed drops.Set the key switch to Position 0.Check the side brush, rotary brushand brush area for residual wasteand remove the waste, if necessary.Ensure that there is sufficient fuel inthe tank (only Hako Hamster 800 V)or that the batteries are sufficientlycharged (only Hako Hamster 800 E).Start the machine. If the fault occursagain, contact a Hako servicecenter.If the machine cannot beswitched off, pay attention tothe rotating fan when youdisconnect the cable or pull outthe spark plug connector! Riskof injury!3.5 OptionsThe basic machine can be upgraded byadding further components. The orderand spare parts numbers for thesecomponents are provided in brackets.• Carpet kit (6460)By fitting the carpet kit on the HakoHamster 800 E, the machine isconverted for clearing up dry wastefrom carpets.Please refer to the spare partscatalogue on our internet siteat www.hako.com foraccessories, such as rotarybrushes, side brushes etc.21 1