Managing the EncoderConfiguring Metadata CaptureMakito X User’s Guide, v2.2, Issue 02 11011. To view Metadata statistics, click Statistics. For details, see “Metadata Statistics” onpage 122.12. To return to List View, click METADATA from the sidebar menu.Configuring Network Metadata SourcesYou can configure the Makito X to capture metadata from a user definable network port(up to eight UDP inputs). The encoder can receive either (a) KLV payload encapsulated inUDP or (b) CoT inside UDP that is converted to KLV and then streamed (see “CoT/UDPwith SPI Message Filtering Based on UID” on page 103).You must specify the UDP port on which the Makito X will listen for incoming metadata.However, the IP Address is only required for reception of multicast metadata, or if you onlywant to accept messages coming from a specific sender.To add a network metadata source:1. From the Metadata List View, click Add.2. On the New Metadata Source dialog, select Network for the Metadata Type and clickContinue.The Create New Metadata Source page opens (as shown in the following Networksource example).
