CLI Command ReferencestorageMakito X User’s Guide, v2.2, Issue 02 346storageS YNOPSISstorage device command [options] [parameters]device = ssd, usb, sdcommand = format, mount, eject, restartDESCRIPTIONThe storage command is used to manage storage devices on the Makito X with Storagedual-height model. This includes formatting and ejecting storage drives.To display available storage devices use storage list.OPTIONSA CTIONSSTORAGE P ARAMETERS-f --force Never prompt for confirmation.-v --verbose Display output from low level commands.list Displays available storage devices for the encoder.Parameter Default Description/Valuesdevice n/a Specifies the device type, either:ssd, usb, sdcommand n/a Specifies the command, either:format, mount, eject, restartAvailable format command parameterqualifiers are:• fs = ext4, ntfs, fat32, exfat• label = volumenameThe SSD drive can only be formatted as ext4.The USB drive will be formatted as ntfs bydefault.NOTE: The Makito X does not supportformatting of SD drives.
