System Administration and StorageViewing System Status InformationMakito X User’s Guide, v2.2, Issue 02 175The Status settings are read-only. For details, see the following section, “Status Set-tings”.2. To reboot the encoder, see “Rebooting the Encoder” on page 176.3. To display a snapshot of system information, see “Taking a System Snapshot” onpage 176.Status SettingsThe following table lists the Status settings. Status information can be useful for trouble-shooting and may be forwarded to Haivision Technical Support if you are requestingtechnical support.Status Setting Description/ValuesCard Status OK (or error message if applicable).Card Type The type of encoder, e.g., Makito2 Dual-SDI Encoder.Part Number The Haivision part number for the encoder, e.g., B-292E-HDSDI2Serial Number The serial number for this encoder appliance or card.Firmware Version The firmware version of the encoder, e.g., v2.2-47Firmware Date The firmware release date.Firmware Options (If applicable) Firmware options installed, e.g., KLV-COT(Metadata Capture KLV & COT). For more information,see “Configuring Metadata Capture” on page 102.Hardware Version The hardware version of the encoder.Hardware Compatibility -001G (basic card assembly).CPLD Version The CPLD version of the encoder.Boot Version The Boot version of the encoder.System Uptime The length of time the encoder has been “up” andrunning (e.g., 1 day 03:42:03).Encoding Chipset Load The combined video encoding processor usage inpercentage% (combining both Hi and Lo streams).Displays a snapshot of system information in a newwindow. See “Taking a System Snapshot” on page 176.Reboots the encoder. See the following section,“Rebooting the Encoder”.
